Mislabeling different batches of wallpaper in the same wall, leading to color difference is known as to become a batch of color difference;
Tip: be sure to focus on the wallpaper great deal quantity when buying and building.
Building of the usage of quality not pass binders, or wallpaper on the trunk of the glue swab uneven, resulting in wallpaper appear warped edge, and mistakenly that is not able to paste;
Tip: match an excellent horse with a good saddle. Don’t allow the mere reality of experiencing a few bucks value of glue impact your outfit. Brand products are recommended.
During the building, the joints were treated with scraping panel, which led to harm of the lines on both sides of the joints.
Tip: gentle building.
During the building, the wallpaper surface area is scratched hard with a scraper or a difficult towel (with lots of thread ends), which leads to the inking ink or gold, silver, pearl powder and so on falling off.
Hint: when building, strength ought to be appropriate.
Through the construction, due to unwashed hands, dirty towels, and soiled wall materials leaking from the joint, the side view at the joint became black colored, that was mistaken for the medial side view shadow.
Tip: preserve your Kids Room Wallcovering construction equipment clean.
Through the construction, because of the excessive overflow of glue from the joint, a large amount of clean drinking water was not soaked with a sponge later on, and the joint became yellow many days later on the wall on the wallpaper, that was mistaken for quality problem.
Tip: clean the glue at the joint after construction.
Hard scraper is utilized in the construction of gold foil paper, resulting in surface harm or scratch of gold foil, which is recognised incorrectly as quality problem.
Tip: construction tools ought to be selected for different components and different parts.
During the structure of the gold foil paper, the white paste is mistakenly contaminated with the top of gold foil, causing the gold film to lose its luster (the white paste will form a mist film upon the surface of the gold film and can’t be wiped), which is mistaken for quality problems.
Suggestion: gold foil is beautiful, but she’s also scared of glue.
Following the metope brushed varnish, didn’t await varnish to dry fully then paste wallpaper, cause varnish by bottom paper infiltration surface paste, create chemical response, form like the protruding granule of measles shape, mistake is an excellent problem;
Clew: metope does not dry structure but big avoid
After wallpaper is pasted, open a window immediately ventilated, bring about wallpaper dry shrink as well fast, form juncture is apparent, blunder is quality problem;
Tip: end up being gradual and don’t be impatient.
Because wall seeps water, bring about wallpaper to paste after a period of time, begin by foundation paper mildew, the secretion of mould and paste produce chemical reaction, bring about wallpaper surface large area discoloration, appear red place or blue spot, and mistake is quality issue.
Due to the need for warm and humid environment for mold growth, this kind of circumstance often occurs in rainy and high-temperature seasons, which generally occurs initial in the internal part of the wall with discharge pipes or close to eaves and Windows.
Tip: it is very important to safeguard the wall structure from moisture, especially the wallpaper foundation paper made of pure paper and nonwoven cloth should be waterproof.