Categories
Wallpaper

Old driver tells you, this time affix wallpaper, absolutely can work twice with half the effort

The home decoration process is several, and the detail is certainly very much. Wallpaper building is the final procedure that the house decorates hard outfit, soft costume begins. The wallpaper ought to be inside the carpentry, paint, water and electricity, filling all hardware finish, and have been cleaned after one time.

1. Ground and skirting are installed

❖ avoid play keel, saw wood flooring and so on make the wallpaper.

❖ to avoid shock when install the line that play a base, wallpaper and metope separation, thus appeared the wallpaper bubbling, become bended edge phenomenon.

❖ to prevent cutting the line that play a base when large amounts of particles pollution and wallpaper bruised.

❖ general putty is usually not batch towards the base bottom, first wallpaper aren’t cut neatly, at risk of become warped edge, with a extended time lead to the wallpaper into the coils.

❖ to stop the collection that play basics to get glass glue wallpaper seal off up, unable to help to make the wall of the water molecules emissions, lead to the line that play a base site wallpaper mildew.

❖ play crural line, likely wall membrane and play crural range straightness is not enough or have crack, the wallpaper has a face mask aperture effect.

2 cover and door are installed

❖ install door 1st, can prevent the wallpaper damaged and getting dirty, as well facilitate the repair of paint. Paint mending (gaps in door covers and wall surfaces, as well as stopping lines) will stain the wallpaper if applied properly.

❖ door size could have a discrepancy, in the event that small size, wallpaper, 1st door will appear empty phenomenon; If fully pasted, it is easy to pull the wallpaper when installing the door, triggering damage to the wallpaper.

Timber paint can not end up being finished with wallpaper, after making wood paint

❖ because carpentry paint when construction, atomization, the color will stick on the wallpaper. And when color construction, want to carry out protecting to finished item, especially the periphery metope such as cabinet, door, partition should stick defensive film, if atomize to metope, to the building quality of wallpaper is usually not assured, give a problem very easily.

3. Air conditioning holes

❖ avoid wallpaper damage of drilling hole.

❖ steer clear of wall vibrations cause the wallpaper off when punching.

❖ to avoid airborne dirt and dust pollution when punching wallpaper.

The holes of the curtain hanging rod possess been made in move forward

The position of curtain hanger rod support is well designed and holes are made to avoid damaging the wallpaper surface with late punching. In particular, flocking, silk, deep pressure, special materials such because some hard to do wallpaper, before paste should be made in advance to hang the curtain rod holes.

Tips on how to paste the wallpaper

Eliminate the wall skin: remove the original paint and additional objects in the wall, apply gypsum powder to service the cracked parts of the wall, and apply the bandage after leveling; If the sand and greyish walls, partition walls, nonetheless also paste glass textile or cloth netting; Some of the poor quality partitions or external walls to reach the insulation result, need to be full of nail plasterboard.

Minimize wallpaper: measure metope level first, cut wallpaper length again, have two kinds of circumstance: do certainly not add cut 5 to 8 centimeters by metope height according to metope height left and right sides span, use as up and down repair edge: to pay wallpaper needs to consider the symmetry of style, reason cut length will need to increase according to real circumstance, can lengthen eight to 10 centimeters frequently.

Kids Room Wall paper Coating adhesive solution: wallpaper glue solution with covering around the back of slicing good wallpaper brush, shell out special attention fully stuff around the edge to liquid, in order to ensure the development quality, pasted wall paper and glue in the face of folding place 5-10 minutes (attention, nor the exterior force, in order to avoid wallpaper in crimp, especially it’s ok cloth) completely through the stuff liquid into the underlying part of the paper may be posted, besmear brushs number of wallpapers, every single time and to post.

Wall paper construction: it is definitely to be in typically door edge or tone Angle from go down to paste first wall membrane paper, by scraping board from go down, by introversion outside, blow daily news paper gently, extrude bubble and superfluous glue water, make wall paper can be even close to metope.

Before pasting wallpaper, close off power supply: when pasting wallpaper, if encounter the place that has power-switch or socket on metope, can turn off total power supply first, cover wall structure paper next all electric power supply and socket, trim two diagonals from centre of gravity point, can show 4 small triangular, reoccupy art tool removes all round redundant wallpaper.

Trim cleaning: cut away the extra wallpaper at the two ends of the uppr and lower ends, and make the blade sharp to stop rough edges. Dip in water with cloth or sponge to wipe the glue liquid that remains on the wall paper surface completely clean, lest wall membrane paper becomes yellow, after wall paper is dried out, if find a bubble on the surface, cut wide open with the knife try out glue liquid again press flat can eliminate (with needle tube better)