Categories
Wallpaper

The most common wallpaper problems and solutions!

Whenever we put wallpapers, we usually encounter problems like this. In particular, most of the friends who want to do their personal wallpapers are more than they desire, and finally they will find that there are always some little flaws.
In fact, provided that the construction is looked after, these problems can be avoided. Today, we will pick out these problems and focus on solving them!
Base film peeling
1) Before brushing the base film, check whether the wall is standard, zero powder, no floating level.
2) Is there hook crack in the wall?
3) If the construction temperature is over 5 degrees.
4) Brush the base film too thick when it is first, and brush the next one when it is not dry. Due to the difference in drying time taken between the inner and outer layers, it may cause peeling.
5) Whether the base film is too thick, can be relieved by adding water. After polishing with sandpaper, re-brush the base film.
The treatment of the base film has a great influence on the wallpaper effect, and the most direct effect is the stability of the wallpaper. Therefore, the bottom film should be handled in accordance with certain requirements of the guidelines, combined with the actual situation.
Glue overflow
Glue overflow is a common phenomenon along the way of wallpapering. During the construction process, stay away from the glue overflowing the wallpaper surface area through the paper tape. The rubber surface wallpaper is relatively easy to clean. You can use all the wallpaper except the rubber tape wallpaper. Paper tape building is recommended.
1) Wipe with a damp PVC Wall covering sponge for a surface area washable wallpaper.
2) Use a dry towel to eliminate it, ideal for wallpapers that can’t be stained on the top.
3) Absorbed with a wet sponge, ideal for wallpapers with particles on the surface.
There are signs at the joint seam
The handling of wallpaper seams is definitely an integral part of wallpaper construction, and several professional construction masters have their own tips. For the layman, pay special attention to the structure. When the wallpaper was used, the glue didn’t completely rush out and piled-up at the seams. The glue reacted with the wallpaper for a long period.
Alternative: 60-80 degrees boiling water a little bottle, plus a bottle of white colored vinegar, wait for the water to cool down, squat at the seam. (Recommended for partial testing), the wallpaper can last better in 1-2 months, and 80% of the traces can be removed.
Wallpaper shrinking
The phenomenon of wallpaper shrinkage is mainly caused by the workers’ lack of strict seams during construction, which leads to this problem in the afterwards stage, which is related to the construction technology of the workers. Because the wallpaper is made from wood pulp, it has the characteristics of solid wood swelling and shrinking, the efficiency is not particularly stable, you will see a certain expansion following the glue is completed, and shrinkage occurs during the drying process. Although the expansion is uncontrollable, employees can control shrinkage during building.
The majority of the wallpaper shrinks are invisible unless the joints aren’t enough. In this instance, it is generally preferable to reserve a coincident portion at the joint. Usually, it is preferable that the joint overlaps at 1-3 cm.
If shrinkage has recently occurred, the repair process is relatively simple. Use a wet towel dampened with water to soak the seam for ten minutes, and use the advantage of the wallpaper knife to pick the wallpaper, which can usually be found. If the attachment on the top of wallpaper is a steel surface, it really is easy to make the surface of the wallpaper tarnish and dark after scraping, in fact it is not really recommended to operate.
Wallpaper moldy
1) The wallpaper is moldy and generally provides spots on the surface of the wallpaper.
(1) The wall should be inspected for drinking water seepage.
(2) If the glue is totally dry.
(3)When wallpaper is normally applied, whether moisture and surroundings are present in the wallpaper for a long period, react with the glue to trigger mold.
(4) The elements is humid.
(5) The wallpaper is wet.
Moldy wallpaper is certainly a problem that individuals who are wallpapering come to mind about. It is also one of the most difficult complications to solve after emergence. Consequently, this kind of problem should be predicated on prevention. It is advisable to work before moisture and moisture.
Then, following the wallpaper has such problems, is there no solution? of course not.
2) Processing method
(1) The mildew is small. It is suggested to wipe with drinking water or detergent and blow dried out with a hair dryer.
(2) Bleaching water is definitely simple to irritate the epidermis and may trigger the wallpaper to fade. It isn’t recommended.
(3) If the mold is huge, the wallpaper needs to be replaced. If the wall is seepage, it’s important to completely resolve the problem before posting.