Categories
Wallpaper

The most common wallpaper problems and solutions!

We constantly have these and other complications when we put up our wallpapers. Especially the friend that a great deal of need to stick wallpaper of oneself start function, it is normally to adhere to one’s inclinations even more, discovered to stick finally just usually acquired a few small pimple.

In fact, as long as construction attention, these problems can be avoided. Today, let’s find out all these problems and focus on resolving them!

Basal membrane peeling

1) before cleaning the bottom film, check whether the wall structure is regular, no powdering and no flying coating.
2) whether there are small cracks in the wall structure.
3) whether the building temperatures is above 5 levels.
4) if the initial brush is too thick, brush the second one before drying. The drying out time of the inner and outer layers may cause peeling.
5) whether the foundation film is too thick, water may be added for relief. Brush the bottom film again after sanding with sandpaper.

The treatment of substrate film has great influence on the wallpaper effect, and the most direct effect is on the stability of the wallpaper. Consequently, the substrate membrane must end up being treated according to the requirements of the guidelines and mixed with the actual situation.

The glue overflow

Glue overflow is a very common trend in the process of pasting wallpaper, in the building procedure, we should try our best to avoid the overflow of glue through paper video tape, the paper wallpapers is relatively easy to clean, may not use paper cassette, all the wallpaper additional than the paper tape suggested to use paper tape construction.

1) clean with a wet sponge, suitable for scrubbing up wallpapers.
2) absorbent with dry bath towel, ideal for wallpapers whose surface area can not be touched with drinking water.
3) absorbent with a damp cloth or sponge, suitable for wallpapers with granular surface.

Blot in base joint

The treatment of wallpaper joint is the key link of wallpaper construction all the time, a lot of professional construction professionals have their own tricks. For the layman, in the construction of particular interest. When adhering picture, glue do not really arrive out completely, accumulate at juncture, time is long glue and wallpaper rise response.

Option: take a little container of 60-80 degree boiled water and add a container of white colored white vinegar to it all. When the drinking water cools, wash it at the joint. (regional test is definitely suggested) the wallpapers will be even more effective in 1-2 months, and 80% traces can end up being eliminated.

The wallpaper shrinks and warps

Picture contraction trend is mainly the workers in the structure of loose bones, resulting in a later on period of this issue, and employees with the structure technology. Because wallpaper is certainly made by wood pulp, possess the characteristic of wood moist bilge dry shrink, performance can be not really particularly Pure paper Wallpaper stable, after heading up glue liquid can have particular dilatancy, produce systole in drying out procedure. Although the expansion can not really be managed, employees can control the contraction during structure.

Most wallpapers contractions are hidden, unless the seams are insufficient. In this case, it is normally feasible to reserve overlapping parts at joint parts. Usually, 1-3 cm of overlapping parts at bones are better.

If you have already contracted, the restoration process is relatively simple. Dip the joint for 10 a few minutes with a wet hand towel and choose up the wallpaper with the tip of the picture knife. If the attachment of the wallpapers surface area is metal surface, scraping easily makes the wallpapers surface shed shine and change dark, damage the picture surface gorgeous, it is definitely not recommended to operate.

The wallpaper moldy

1) the wallpapers is moldy and usually has places on the picture surface.
(1) water seepage should be checked.
(2) whether the glue is definitely completely dried out.
(3) whether there is normally water and air flow in the wallpaper for a long period, which will trigger mildew when it all reacts with glue.
(4) high humidity.
(5) wet wallpaper paste.

Mould of wallpaper is the problem that the person that sticks picture concerns, also be to appear after solve problems coefficient a single of the biggest problems, accordingly, this kind of problem, wish with prevent give priority to. It is normally greatest to prevent damp and damp function in advance.

So, after picture appears this kind of problem, do not have got alternative? Of program not really.

2) treatment method
(1) the mildew stage is small. It is certainly recommended to clean it with fertilizer or detergent and dry it with a hair dryer.
(2) with bleach, it is normally easy to irritate the skin and might cause the wallpapers to lose color. It is certainly not really suggested to use.
(3) if the mildew point is certainly huge, the picture should be replaced. If the drinking water seepage is definitely triggered by the wall, this issue should end up being solved completely before Posting.